Jeep Wrangler (53 cm) 4x4 RC Crawler Offroad avec Stand (échelle 1:8) • EUR 229,00 (2024)

Vendeur: dr.ales ✉️ (466) 100%, Lieu où se trouve: Ljubljana, SI, Lieu de livraison: EUROPE, Numéro de l'objet: 334451825729 Jeep Wrangler (53 cm) 4x4 RC Crawler Offroad avec Stand (échelle 1:8). Jeep Wrangler Hardtop - Jeep Rancher 4×4 Hardtop (4x4 crawler) - 3D printed full RC ************************************ The model is approx. 53 cm long, scale 1:8 and is RC with 4x4 drive (permanent 4x4 - all differentials are in locked state) and gearbox with ABEC5 6700 RS bearings. Reduction gearbox is with 1:40 gear ratio for slow motion and high torque. Doors, hood and trunk can be opened manually Weight approx. 3.4kg 3D printed with PLA, PETG, ASA materials, model from 3DSets.com. Can be used both indoors and outdoors and have enough torque and power to drive in heavy terrain. ************************************ Build with love for myself, only one piece - selling due to relocation. In package you will get fully build Jeep Rancher 4×4 with DC motor, ESC, receiver and stand. Model is ready to go (you just insert your battery 2S 7.4V and bind your radio transmitter or use your own transmitter). ************************************ For any additional info please send me a message. Components: Power connector XT60 receivers Flysky FS-GR3E 3 channels 2.4 GHz Steering servo motor TrackStar TS-621MG Digital Servo 25T 21kg / 0.16sec / 57g (Dual Japan NSK Ball Bearing) Speed controllers Hobby Wing QuicRun 1060 60A engine MABUCHI 540-6527 Brushed Motor 90W tires 4x + 1x reserve (100mm rubber with foam inserts, Material: Rubber, Color: Black, Height: 100 mm, Width: 38 mm, Inner Diameter: 48 mm) bearings ABEC5 6700 RS (approx. 30x bearings in model) dimension 51.0 cm length, 24.5 cm width (including mirrors), 22.5 cm height Model weight approx. 3.4kg Jeep Wrangler Hardtop - Jeep Rancher 4×4 Hardtop (4x4 crawler) - 3D printed full RC. The model is approx.53 cm long,scale 1:8 and is RC with 4x4 drive (permanent 4x4 - all differentials are in locked state) and gearbox with ABEC5 6700 RS bearings.

• Condition: Neuf: autre (voir les détails)
• Condition: 3D printed (approx 2 months were spent to build this model)
• Empfohlenes Gelände: Offroad
• Modell: wrangler
• Produktart: Crawler
• Nachbildung von: jeep
• Maßstab: 1:8
• Motorart: Brushed